"MAKE SURE YOU HAVE ON HAND" : Screwdriver, Drill, Dowels.
* Let's start by saying that installing solar panels is not a simple thing. It takes a calm, careful and above all patience. An important because our system makes the most of the sun, in fact, we should try to install it on a permanently sunny. Then we have to choose the power of the PV system to be installed, to do what we can build on our average power consumption during the year.
* After carrying out these preparations, we can procure the necessary tools to mount the panels, including a screwdriver and a drill. Then, the panels must be absent inclined at about 30 degrees and facing south. We begin to mount on the roof using its supports, after which we fix for good with the dowels.
* Now we have to connect a power cable that goes from the panels to the point where we decided to put the current controller and batteries for energy storage. Now we need to install an inverter in the house (that is an electronic device that converts the energy produced by the panels into AC power that you enter in the electrical system) and in turn connect to the batteries.
* After frothing the solar panels, we must turn to our manager of electricity that will install a second meter. We will have two counters: one that fits our consumption and another that measures the amount of energy produced by the plant we have installed. We have seen how to install solar panels on your own is not a walk. It must be very careful because you have to climb on the roof, and also serves as a bit of familiarity with electrical systems. In fact, for those who have never had to deal with the electrical systems will be very difficult to mount a photovoltaic system on their own. So for those who are unfamiliar. However, it is recommended to call the specialists for help. (The images are taken from various websites.)
Reference: amosrenewableenergy.blogspot.com
0 comments:
Post a Comment